VOLTIMA VSI 104, Инструкция по установке и эксплуатации

Страница: 87 / 116

VOLTIMA VSI/VST Series 87
Connection: Input (DC) / inverter-battery
1. Ensure that the power switch of the inverter is in the position OFF (O).
2. Connect the red plus cable (+) to the red connector (+) on the back of the inverter and
the other cable end on the battery (positive pole) .
3. Connect the black minus cable (-) to the black connector (-) on the back of the inverter
and the other cable end to the battery (negative pole) .
4. To prevent a short circuit, the protective covers provided should be fitted.
5. To protect the device against short circuit, we recommend installing a fuse (F1) as close
as possible to the plus pole of the battery.
6. Wait about 20 seconds until you turn on the inverter.
7. The current indicator lights up green and mains power is available on the two AC output
sockets.
8. The LCD screen lights up.