44 (48)
ENG
Never charge the battery pack at an
ambient temperature of below 10°C or
above 40°C.
If a lithium-ion battery is to be stored for
an extended period, the charge level
must be checked regularly. The optimum
charge level is between 50% and 80%.
Always disconnect the mains plug before
removing the battery pack from or inserting
it into the charger.
CAUTION!
Checking the battery charge level
To check the battery status, press the battery
charge level button. The status/remaining
charge is shown on the battery display LED
as follows:
GREEN/RED/ORANGE = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery.
Mounting the dust extraction system
Dust extraction system is recommended
when the multi-tool is used for grinding.
Mount the system before installing a tool.
Attach the dust extraction system over the
tool holder ad fixtate it to the housing with
the screw.
Connect the elbow pipe to the dust ex-
traction system and then connect a suitable
vacuum cleaner to the pipe.
Tool change
Use only the accessories and attachments
which are specified in the operating instruc-
tions and are compatible with the appliance.
Recommended tool
For separating and plunge-saw cuts in wood,
plastic, plaster and other soft materials as
well as for sawing close to an edge a plunge-
cut sawblade PC32 is recommended.
For separating and plunge-saw cuts in tiles
or other harder materials a diamond saw
blade DM65 is recommended.
For removing material residue e.g. tile ad-
hesive and treating any remainders of mor-
tar/ concrete, tile/carpet adhesives, paint
or silicone residues a scraping knife CP52 is
recommended.
For sanding the delta sanding plate is rec-
ommended together with a sandpaper suit-
able for the task.
Always remove the battery from the
multi tool before inserting or
removing a tool.
If you want to use the dust extraction system,
this must always be installed before the tool
is installed.
Residual risk
Even if properly operating and handling this
product in accordance with all the safety
requirements, potential risks of injury and
damage remain.
a) Ear damage if working without ear pro-
tection.
b) The harmful /toxic dusts produced
during operation pose the risk to the health
of the operator and persons in the vicinity.
Wear eye protection and a dust mask.
c) The device is not a toy and does not be-
long in the hands of children.
Before use
Charging the battery pack
The storage climate should be cool and
dry and the ambient temperature should
be between 0°C and 50°C.
Insert the battery pack into the charger.
Insert the power plug into the socket. The
green charge control LED lights up briefly,
then the red charge control LED lights up.
The green control LED indicates that
charging is complete and the battery pack
is ready for use.
Inserting/removing the battery
Inserting the battery pack
Slide the battery pack into the handle until it
engages.
Removing the battery pack:
Press the release button and remove the
battery pack.
Содержание 7330027147901
Страница 48: ......
