Appendix B
Remote Display Module BBR-3100 (optional)
I. Introduction
The Remote Display Module is an optional module which has two functions:
1. Displays real time key information of the BBC-3140.
2. Sets charging parameters of the two user defined charging profiles.
Absorption Voltage Range: 13V to 15.5V
Absorption Time: 1 hour to 6 hours
Float Voltage: 12.6V to 14V
PREPARATION FOR USE WITH REMOTE DISPLAY PANEL
CORRECT SETTING OF DIP SWITCH 4 OR 5
Push either DIP 4 or DIP 5 to On (up position).
Only one DIP switch is allowed to set to On (up position)
DIP 4 UP: User defined 1
DIP 5 UP: User defined 2
Check LED B is in orange solid to confirm correct setting of DIP switch.
If LED B is in blinking orange then more than one DIP switch, unit is not set for
this mode.
