Voltech AT360, Руководство пользователя

Страница: 156 / 470

P
ROGRAM EDITOR
P
AGE
3-34 V
OLTECH
AT
I
U
SER
M
ANUAL
Click on ‘OK’ with ‘Measure without Fixture Compensation’ selected if you do
not wish to perform compensation. This is normal if the value of inductance is
high.
If you click on ‘OK’ with ‘Compensate Fixture’ selected, then there will be
additional messages, depending on whether the test requires short- or open-
circuit compensation or both (see section 2.8: ’Compensation’). In this case,
the LS test requires both short-circuit and open-circuit compensation. The
following dialogue box will be shown first:
Fit the required short-circuit header, and click on ‘OK’.
The Editor will now command the tester to perform the Fixture Compensation
for the required test (in this case LS). The tester will then store the ‘zero’
value, and subtract it from the next result returned for the test.
If the short-circuit links are not correctly fitted, you may see an error message
which allows you to try again, or to cancel the compensation.
You will then be prompted to perform open-circuit compensation: