VOLTCRAFT V-CHARGE 80GPS, Руководство по эксплуатации

Страница: 87 / 100

87
b) Loading Rechargeable Battery Data
• Select the function "Memory Load" in the main menu of the charger with
the button "ESC/MODE/STOP" or "DEC".
• Confirm the selection by pressing the "START/ENTER" button.
• Select one of the 10 memories with the button "INC" or "DEC".
The data stored in the memory are displayed, e.g. rechargeable battery
type, rechargeable battery programme, cell number, charging and dis-
charging current.
A memory where no data have been stored yet cannot be selected. If, e.g., only memory slots 1 and 4 are
occupied, you can only select memory slots 1 and 4 either.
• Load the battery data from the selected memory by pushing the button "START/ENTER" for 3 seconds.
The display shows "Loading..." and 3 sound signals are output (if the
sound signals have not been switched off in the setting menu, see
chapter 15).
The charger is then in the charging/discharging program; the associated
data are displayed.
In the example on the right, the data for a LiPo rechargeable battery with
3 cells, a capacity of 3000 mAh and a charge current of 3.0 A have been
transferred from the memory.
• The rechargeable battery programme can be started as usual by pushing the "START/ENTER" button for
3 seconds.
Alternatively you can, of course, change the settings loaded from the memory, e.g. to increase or reduce the
charging current.
Briefly push the "START/ENTER" button several times; the respective chosen set value flashes.
Change the setting value using the button "INC" or "DEC". Keep the respective button pressed for quick
adjustment. Briefly push the "START/ENTER" button to accept the setting.
When no display is flashing anymore, keep the "START/ENTER" button pushed (approx. 3 seconds), to start
the rechargeable battery programme.
PROGRAM SELECT
Memory Load
MEMORY LiPo [0]
BAL 3S 1.0A
Loading...
LiPo BAL-CHG 3S
C= 3000mAh 3.0A