84
Various information is indicated on the display during a charge/discharge process by repeatedly pressing the
button "DEC". If you do not push any button for a few seconds, the charger will return to the normal display.
• After completion of charging, an audio signal is emitted (if it has not been turned off).
If you wish to cancel the charging process, push the "ESC/MODE/STOP" button.
c) Discharging Rechargeable Batteries ("DISCHARGE")
This rechargeable battery program can be used to put partially charged lead batteries into a defined starting condi
-
tion or to perform a measurement of the rechargeable battery capacity.
The maximum possible discharging current depends on the battery type, battery capacity and number of
cells. The max. discharge output of the charger is 10 W. This limits the max. possible discharge current of
rechargeable batteries with multiple cells.
Proceed as follows to discharge a lead battery:
• First, choose the rechargeable battery type "Pb Battery" with the button "ESC/MODE/STOP" or "DEC" as de
-
scribed in chapter 13. a), then briefly push the button "START/ENTER".
• Select the rechargeable battery programme "DISCHARGE" with the button
"INC" or "DEC".
The set rechargeable battery type is shown in the upper left of the display,
and the rechargeable battery programme next to it.
The value on the lower left shows the currently set discharging current, the value on the right shows the voltage or
number of cells of the lead battery (in this example, a 6-cell lead battery (6 x 2.0 V = 12.0 V)).
Use the button "INC" or "DEC" to select a different rechargeable battery programme; use the button
"ESC/MODE/STOP" to return to the main menu.
• If the value for the discharging current must be changed, briefly push the "START/ENTER" button. The discharg
-
ing current flashes.
• Change the discharging current using the button "INC" or "DEC". Keep the respective button pressed for quick
adjustment.
Briefly push the "START/ENTER" button to confirm the set discharging current.
• When no display is flashing anymore, keep the "START/ENTER" button pushed (approx. 3 seconds), to start
discharging.
Pb DISCHARGE
1.0A 12.0V(6P)
Содержание V-CHARGE 80GPS
Страница 21: ...21 10 MEN STRUKTUR...
Страница 69: ...69 10 MENU STRUCTURE...
Страница 98: ...98...
Страница 99: ...99...