38
16. TROUBLESHOOTING
With this measuring device, you have purchased a product built to the latest state of the art and operationally safe.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions yourself:
Always observe the safety information!
Error
Possible cause
Remedy
The meter cannot be switched on.
Is the battery dead?
Check the battery condition.
Disconnect and reconnect the battery
(perform reset).
No correct measured value is
displayed.
Wrong measurement?
The plug of the sensor is not
inserted correctly.
Check the sensor plug.
The meter cannot be operated.
The hold function is activated
(display "HOLD").
Deactivate the hold function with the
button "HOLD".
Repairs other than those described above must only be carried out by an authorised specialist.
If you have any questions about handling the meter, our technical support is available.
