40
Push the button “F2” to save the measured value.
Select the function “Yes” to save the measured value.
The display shows all parameters such as memory slot number, measured value, time and date during storage for
approx. 2 s. The display then switches back to the starting menu. Then another measured value can be recorded
and saved.
To cancel saving, select the function “Esc”. Cancelling will return you to the starting menu.
Storage slot assignment will take place automatically in sequence until all 30 places
are occupied. When no free memory slot is available anymore, an error message
appears.
To be able to save new measured data, delete individual places, the entire memory or
transfer the measured data to a computer.
Reading and deleting of the memory slots is described in chapter “Reading and Delet-
ing the Measured Value Memory“.
reading and deleting measured value memory “mem”
The function “Mem” can be used to read and delete the occupied memory slots in the display.
Switch on the meter by briefly pushing the measuring button (5).
Select the setting menu “Unit/Mem/E” by pushing the button “MODE” within the pre-set deactivation time.
Get to the measured value memory “Mem” via button “F2”.
