VOLTCRAFT DSO-2104 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 66

background image

3.Quick Start

9

of the waveform of the CH3 channel. If the pointer is not displayed, it
means that this channel is not opened.

25. The two blue dotted lines indicate the horizontal position of cursor

measurement.

26. The green pointer shows the grounding datum point (zero point position) of

the waveform of the CH4 channel. If the pointer is not displayed, it means
that this channel is not opened.

27. The yellow pointer indicates the grounding datum point (zero point position)

of the waveform of the CH1 channel. If the pointer is not displayed, it
means that the channel is not opened.

How to Implement the General Inspection

After you get a new oscilloscope, it is recommended that you should make a
check on the instrument according to the following steps:

1. Check whether there is any damage caused by transportation.

If it is found that the packaging carton or the foamed plastic protection cushion
has suffered serious damage, do not throw it away first till the complete device
and its accessories succeed in the electrical and mechanical property tests.

2. Check the Accessories

The supplied accessories have been already described in the "

" of this Manual. You can check whether there is any loss of

accessories with reference to this description. If it is found that there is any
accessory lost or damaged, please get in touch with our distributor responsible
for this service or our local offices.

3. Check the Complete Instrument

If it is found that there is damage to the appearance of the instrument, or the
instrument can not work normally, or fails in the performance test, please get in
touch with our distributor responsible for this business or our local offices. If
there is damage to the instrument caused by the transportation, please keep
the package. With the transportation department or our distributor responsible
for this business informed about it, a repairing or replacement of the instrument
will be arranged by us.

How to Implement the Function Inspection

Make a fast function check to verify the normal operation of the instrument,
according to the following steps:

1. Connect the power cord to a power source. Press the

button on the

bottom left of the instrument.

«
...
11
12
13
14
15
...
»

Содержание DSO-2104



































































Отзывы:

Нет отзывов

Похожие инструкции для DSO-2104

Бренд: Makerfire Страницы: 10

Бренд: Rath Страницы: 3

Бренд: ICS ELECTRONICS Страницы: 6

SATURA SPOT LED PRO

Бренд: Elation Страницы: 41

Бренд: Tapco Страницы: 16

Бренд: Zenbooth Страницы: 40

Visium CytAssist

Бренд: 10x Genomics Страницы: 51

Chromium X Series

Бренд: 10x Genomics Страницы: 5

Sonopuls HD 4050

Бренд: BANDELIN Страницы: 48

Бренд: CAMPAGNOLA Страницы: 4

Бренд: Pari Страницы: 12

Бренд: laerdal Страницы: 2

Бренд: laerdal Страницы: 104

Бренд: laerdal Страницы: 33

Бренд: laguna Страницы: 16

Бренд: Lafayette Страницы: 2

Бренд: TATU Страницы: 30

Бренд: Rane Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды