3.Quick Start
8
10. The waveform of CH1.
11. Right Menu.
12. The waveform of CH4
13. The waveform of CH3
14. The waveform of CH2.
15. Current trigger type:
Rising edge triggering
Falling edge triggering
Video line synchronous triggering
Video field synchronous triggering
The reading shows the trigger level value of the corresponding channel.
16. It indicates the measured type and value of the corresponding channel. "
T
"
means period, "
F
" means frequency, "
V
" means the average value, "
Vp
"
the peak-peak value, "
Vr
" the root-mean-square value, "
Ma
" the maximum
amplitude value, "
Mi
" the minimum amplitude value, "
Vt
" the Voltage value
of the waveform's flat top value, "
Vb
" the Voltage value of the waveform's
flat base, "
Va
" the amplitude value, "
Os
" the overshoot value, "
Ps
" the
Preshoot value, "
RT
" the rise time value, "
FT
" the fall time value, "
PW
" the
+width value, "
NW
" the -Width value, "
+D
" the +Duty value, "
-D
" the -Duty
value, "
FRR
" the FRR, "
FRF
" the FRF, "
FFR
" the FFR, "
FFF
" the FFF,
"
LRR
" the, "
LRF
" the LRF, "
LFR
" the LFR, "
LFF
" the LFF,"
PD
" the Delay
A->B
value, "
ND
" the Delay A->B
value, "
TR
" the Cycle RMS, "
CR
"
the Cursor RMS, "
WP
" the Screen Duty, "
RP
" the Phase A->B
, "
FP
" the
Phase A->B
, "
+PC
" the +Pulse count, "
-PC
" the - Pulse count, "
+E
" the
Rise edge count, "
-E
" the Fall edge count, "
AR
" the Area, "
CA
" the Cycle
area.
17. The readings show the record length.
18. The frequency of the trigger signal.
19. The readings show current sample rate.
20. The readings indicate the corresponding Voltage Division and the Zero
Point positions of the channels. "BW" indicates bandwidth limit.
The icon shows the coupling mode of the channel.
"
—" indicates direct current coupling
"
～
" indicates AC coupling
"
" indicates GND coupling
21. The reading shows the setting of main time base.
22. It is cursor measure window, showing the absolute values and the
readings of the cursors.
23. The blue pointer shows the grounding datum point (zero point position) of
the waveform of the CH2 channel. If the pointer is not displayed, it means
that this channel is not opened.
24. The orange pointer shows the grounding datum point (zero point position)
