VOLTCRAFT B6, Руководство по эксплуатации

Страница: 73 / 172

73
14. SAVING/LOADING RECHARGEABLE BATTERY DATA
The charger has a total of 10 memories in which you can save battery data/settings. They can be loaded
again on demand.
a) Selecting/Setting Rechargeable Battery Data
• Select the function „BATT MEMORY“ in the main menu of the charger with
the button „INC“ or „DEC“.
• Confirm the selection by pressing the „START/ENTER“ button. The memo -
ry number flashes.
• Select one of the 10 memories with the buttons „INC“ or „DEC“.
If there already are data in the memory, the display will alternate, e.g.,
between the rechargeable battery type and the cell number, as well
as the charging and discharging current.
When the memory is empty, only „ENTER SET ->“ is displayed.
• Confirm the selection of the memory number by pressing the „START/
ENTER“ button.
The rechargeable battery type is displayed first; see figure on the right.
Use the buttons „INC“ or „DEC“ to select the desired setting functions (e.g. battery type, cell number, char-
ging current, etc.).
If a setting is to be changed, briefly push the button „START/ENTER“. The respectively adjustable value
flashes.
Change the flashing value with the buttons „INC“ and „DEC“. Keep the respective button pressed for quick
adjustment.
Complete the setting by briefly pushing the „START/ENTER“ button. The respective adjustable value stops
flashing. Then you can select another setting function, see above.
If you want to save all previous settings in the memory selected at
first, call the setting function „SAVE PROGRAM“ at the end with the
buttons „INC“ and „DEC“ and briefly push the button „START/
ENTER“.
Otherwise, all settings are lost! Then the display shows the indication with the flashing memory number
again.
To discard previous settings and cancel setting mode, push the button „BATT.TYPE/STOP“ repeatedly until
you are back in the main menu.
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 1]
ENTER SET->
BATT TYPE
LiPo
SAVE PROGRAM
ENTER