e) Maximum / Minimum
This function permits saving and display of maximum or minimum values during a series of
measurements. Auto-range will be deactivated.
• This mode is only applicable with the following functions: LOZV , LPFV , V , V , mV
, Ω, µA , mA , A , and °C/°F.
• Select the proper range before selecting MAX MIN to ensure that the MAX MIN reading will
not exceed the measurement range.
• The values are taken from the time MAX MIN mode was entered. Input changes of 100
milliseconds or longer will be recorded.
• Long press the MAX MIN button to enter/exit maximum and minimum measurement mode.
• Short press the MAX MIN button to cycle through measurements:
- Maximum value: MAX will show on the display.
- Minimum value: MIN will show on the display.
f) Automatic power off
Automatic power off is an energy saving feature. When activated, the power will turn off if no
activity is detected for approximately 15 mins. Press any button, use the function dial, or restart
to wake.
1
Disable auto-power off
1. Set the function dial to the OFF position.
2. While pressing and holding the SEL/PEAK button, turn the function dial to any position.
3. The symbol will disappear.
2
Activate auto-power off
• Restart the device by setting the function dial OFF then ON again.
• The symbol will show.
61
