Voltask SB-EA Скачать руководство пользователя страница 8

8. In case of the following conditions, please turn off the machine and pull out the power plug:

9. When not used, being repaired, replaced of some parts, being cleaned and checked as well as any other 

    conditions in which dangerous factors exist. If the cord is damaged in manner while plugged in, pull the 

    extension cord from the wall receptacle.

10. Never carry the snow thrower when the cord is connected to the receptacle, so as not to yank the cord.

11. Do not use hands to unclog the chute. Stop motor before removing Debris. Do not walk in front of the 

      running machine. Do not direct discharge at the bystander.

12. When using the machine the user must keep correct postures. Heels should be placed firmly on the ground, 

      while the hands hold the handles firmly.

13. Before using the machine, the user should have a careful inspection of the main machine. Carefully check 

      the different parts of the machine before starting, solving any problem immediately. If you find any abnormal 

      condition, please don’t use the machine before repairing.

14. If you find the main power cable or the extension cable damaged, please pull out the plug from the socket 

      and disconnect the power immediately. Repair the cable for replacing it if necessary. When adding the 

      lubricant or replacing any parts, you must strictly observe the instructions and procedures described in this 

      User Manual.

15. Special care should be paid to any rubber parts, since these parts may increase the engine load and 

      decrease its mechanical power if damaged.

16. When you examine, service clean the machine or replace parts, you must turn off the power switch and 

      disconnect the power cable. Any such operation should be performed after the revolving part inside the 

      machine stops completely.

17. The first time you use the machine or after replacing some parts, you should perform a test running and 

      ensure no abnormal conditions exist to avoid any potential damages or incidents.

18. Do not move or transport the machine when the plug is connected to the power socket and the switch is 

      turned on.

19. When using the machine you must respect local laws and regulations regarding noise control and 

      environment protection. To avoid any noise disturbance to other people, you should carefully decide 

      operation time and consider the surrounding conditions.

20. When the machine is running, be cautious to prevent your hands, feet or head from moving near to the 

      revolving part or the snow exit of the machine.

21. In case you fall or collide with the machine, please check the main machine and parts for any damages or 

      cracks.

When stepping backwards, be cautious about any obstacles beneath your feet or behind you to avoid 

falling.

GENERAL SAFETY INSTRUCTIONS

       05

Explanation of Safety Symbols

Read the instruction manual 

The following warning symbols are to remind you of the safety precautions you should take 

when operating the snow thrower.

Always keep the children or pets away from the working area.

Always keep away from the working area. The throwing snow may hurt you.

Содержание SB-EA


























Отзывы: