OPERATION 14
1. For safe and efficient use of your snow thrower, use only a CE-rated extension cord recommended for
outdoor use.
2. To prevent the extension cord from disconnecting during use, tie the extension cord into a loose knot on the
top right side of middle frame before connecting the plug in the switch cord socket of the snow thrower.
1. Keep the plug into the outlet.
2. To power on, press the button B and trigger C or A at the same time, power is on, then you can release the
button B, the machine started. Release the trigger A or C, power is off.
3. To power off, release the trigger A or C.
OPERATION
Securing the extension cord
Powering on and off
Fig. 18
Fig. 19
NOTE:
Before using the machine, please make sure the power source you will use is in accordance
with the specifications shown in this manual. Before inserting the plug into the socket, make sure the
machine’s roll shaft and the snow thrower’s rubber plates are all fixed firmly with screws, and the
rubber plates are facing to the correct direction. Perform a test run to ensure that the rotor turns freely.
WARNING!
The auger starts rotating immediately after the snow thrower is switched on. Keep hands and feet
away from the auger.