VoloAccess™
User Manual
Copyright © Vololink Pty Ltd 2006-2010
V1.43 July 2010
Page 69 of 78
Under the heading
Ethernet adapter Local Area Connection
the IP address allocated to the
computer by the VoloAccess is displayed. In this example, 192.168.0.2.
Supplementary Telephone Features
(Voice enabled models only)
I picked up the handset and the phone starts dialing out after a brief period before I dial any
numbers! Why?
This is most likely due to the
Default Dialing
feature being enabled and, with the
Timeout
set to a short
period. You can disable this feature (see below) or, you can simply increase the timeout period to 10
seconds. This will provide an adequate delay before dialing a number.
To prevent this behavior, disable the
Default Dial
feature as follows:
Load the Administration Web page at
http://192.168.0.1
.
Select
Telephone
from the navigation panel.
From the drop-down list next to
Default Dial
select
Disabled
.
Click the
Apply
button.
I cannot enable Call Divert
Check that the phone number is specified including the
International Dialing Prefix
and
Country
Code
:
From Admin, it is
+NN
(where NN is the International Dialing Prefix), and
From the keypad, it is
**NN
(where NN is the International Dialing Prefix).
Note
: The
+
is entered as
**
when using the keypad.
If you still cannot enable Call Divert, please contact your service provider, this service may not be
enabled for your account.
I cannot disable Call Divert
Contact your service provider and request that the service be disabled.
I enabled the Call Waiting feature but it does not work. Why?
The
Call Divert
feature settings override
Call Waiting
. Check your
Call Divert
configuration.
If you have enabled
Unconditional Call Divert
or
Call Divert on Busy
; it will prevent Call Waiting
from working. You have to disable the above mentioned Call Divert features for Call Waiting to work.
If the above step does not help, please contact your service provider.
