Vollrath Stoelting U421 I2, Руководство оператора

Страница: 26 / 37

Owner’s Manual #513685 20 U421 I2 Model Machines
C. Place the plastic auger
fl
ights in a plastic bag with
a moist paper towel. This will prevent the
fl
ights
from becoming brittle if exposed to dry air over
an extended period (over 30 days).
D. For water-cooled machines that are left in unheated
buildings, or buildings subject to freezing, the water
must be shut off and disconnected. Disconnect
the water inlet
fi
tting. The
fi
tting is located at the
rear of the machine. Run the compressor for 2 - 3
minutes to open the water valve (the front door
must be attached for the compressor to run). Blow
out all the water through the water inlet. Drain
the water supply line coming to the machine.
Disconnect the water outlet
fi
tting.
E. Disconnect the machine from the source of the
electrical supply in the building.