Vollrath Stoelting U421 I2, Руководство оператора

Страница: 13 / 37

Owner’s Manual #513685 7 U421 I2 Model Machines
MOTOR CALIBRATION
Before starting the motor calibration, be sure there is
sanitizer in the freezing cylinder.
A.
Press the On/Off Left or On/Off Right button. The
Motor Calibration screen will be displayed.
B. Move the cursor over the Left side and press the
SEL button then move the cursor over the Right
side and press the SEL button.
NOTE
The motor calibration can be done for both sides
simultaneously.
C. After the calibration is complete, press the left
arrow button.
D. Drain the machine of sanitizer.
E. Press the Pump On/Off button.
SETTING CONTACT INFORMATION
A. Plug your USB
fl
ash drive into the control if it is
not already plugged in.
B. From the Current Status screen, press the left
arrow button to access the passcode selection
screen. Press the right arrow, SET, and then the
SEL button.
C. After the password is accepted, use the arrows to
move the cursor to the Modify Settings option and
press the SEL button. Then move the cursor to
the User Preferences and press the SEL button.
D. On the User Preferences screen move the cursor
to the Contact Information USB Update and press
the SEL button.
E. The screen will change and show “File Found” for
a quick second while it updates the information.
F. After updating the contact information, the screen
will show the Service Contact Information page.
G. Press the left arrow button to go back to the Current
Status screen and remove the USB
fl
ash drive.
SETTING TIME AND DATE
A. Press the right arrow button.
B. Move the cursor to the Modify Settings option
and press the SEL button. Then move the cursor
to the Time and Date option and press the SEL
button and adjust the settings as required.
1. Press the SEL button to enter the Modify
Time and Date screen.
2. Move the cursor to the setting that needs
to be changed and press the SET button.
3. Use the arrow buttons to change the
setting and press the SET button to save the
change.
C. Press the left arrow button until the Current Status
screen is displayed.
Figure 2-5
Figure 2-6
Figure 2-7
Figure 2-8
Figure 2-9