Fig. 146
In the center console: Button to switch the Park Distance Control system on or off.
¤
Please first read and note the introductory information and heed the WARNINGS
The Park Distance Control (PDC) uses ultrasonic sensors to determine the distance from the front or
rear bumpers to an obstacle. There are 4 sensors for the PDC located in rear bumper (
B
) and
additional sensors in the front bumper (
A
)
⇒
fig. 145
(arrows).
The intermittent and permanent signal chimes given by the front PDC sensors are of a higher pitch
than those given by the rear PDC sensors. This is a standard feature.
The warning signals can be adjusted in the Infotainment system menu
⇒
Infotainment system
.
Switching the Park Distance Control (PDC) system on and off
In order to
Operation (when the ignition is switched on)
Manually activate PDC:
Press the
button
once
.
Manually deactivate PDC:
Push the
button
again
.
Manually deactivate the
display (sound stays
active):
Press a function selection button on the factory-installed Infotainment
system
OR:
Tap the
O
function key on the screen.
Automatically activate
PDC:
Shift into Reverse
(R)
.
OR:
Depending on vehicle equipment, when the vehicle rolls
backwards.
Automatically deactivate
PDC:
Shift into Park
(P)
.
OR:
Drive forward faster than about 5–10 mph (10–15 km/h).
Mute the PDC volume:
Tap the
function key.
Changing from mini PDC
display to full-screen
mode.
Shift into Reverse
(R)
.
OR:
Depending on vehicle equipment, when the vehicle rolls
backwards.
OR:
Tap the mini PDC function key.
Содержание 2015 Golf GTI
Страница 69: ......
