Volkswagen 2015 Golf GTI, Руководство пользователя

Страница: 22 / 400

x
Vehicles with a multi-function steering wheel:
Use the arrow up and down buttons (
*
and
+
) on
the right side of the steering wheel
⇒
fig. 15 .
Trip memories
The display has 3 automatic memories:
x
Since start
x
Since refuel
x
Extend. period
The currently selected memory is shown in the display.
The trip memories are in addition to the trip odometer, which is displayed in the bottom part of the
instrument cluster and controlled using the
/
.
/
button
⇒
fig. 10 (4) .
Press the /+‡2%3%4 button on the windshield wiper lever or the /+ button on the multi-function
steering wheel to toggle between the 3 memories when the ignition is on.
1 Since start
The memory accumulates and stores information about distance driven and
fuel used from the time the ignition was switched on until the time it was
switched off.
If the ignition stays off for 2 hours or more, stored information is automati-
cally deleted. If the trip is continued within 2 hours after the ignition was
switched off, the new values are added.
2 Since refuel
The memory accumulates and stores information about distance driven and
fuel used from the time the vehicle is refueled. The memory is deleted
automatically during refueling.
3
Extend.
period
Depending on the instrument cluster version, the memory displays and
stores the accumulated driving and fuel consumption data of any number of
single trips up to a total driving time of either 19 hours and 59 minutes
99 hours and 59 minutes, and up to a total distance of either 1,999 km or
9,999 km. If one of the maximum values
2
is exceeded, then the memory is
automatically cleared and starts again from 0.
Manually erasing a trip memory
x
Select the memory to be erased.
x
Press and hold the
/+‡2%3%4
button in the windshield wiper lever or the
/+
button on the multi-
function steering wheel for about 2 seconds.
Enabling and disabling displays
On appropriately equipped vehicles, you can set which displays should appear in the instrument
cluster by pressing the
#!2
button followed by the and Multifunction display function keys in the
Infotainment system
⇒
Menu and system settings (SETUP)
. The units in which data is displayed can
also be changed.
Possible driving data menu displays
2
May differ depending on the instrument cluster version.