Installing the rear towing eye
Fig. 192
In the right rear bumper: Removing the cover.
Fig. 193
On the right rear bumper: Screwing in the towing eye.
¤
Please first read and note the introductory information and heed the WARNINGS
There is a threaded hole for the towing eye in the right rear bumper
⇒
fig. 193
.
Always keep the towing eye in the vehicle and stow it securely.
Read and follow the notes about towing
⇒
Tips on towing
.
Installing the rear towing eye
x
Take the towing eye, the lug wrench, and the screwdriver out of the vehicle tool kit in the luggage
compartment
⇒
Vehicle tool kit
.
x
Push on the cover at the bottom marking
⇒
fig. 192
(arrow) so that it pops out.
x
Remove the cover and let it hang from the bumper.
x
Screw the towing eye
clockwise
into the threaded hole as far as it will go (arrow)
⇒
fig. 193
⇒
. Use the lug wrench to turn and tighten the towing eye.
x
When towing is complete, unscrew the towing eye
counterclockwise
to remove it.
x
Position the lower lip of the cover in the opening in the bumper and carefully push the upper lip
over the edge of the opening until the cover has locked in place.
Содержание 2015 Golf GTI
Страница 69: ......