VOKERA MYNUTHE 35 HE, Инструкция пользователя

Страница: 6 / 12

6
2.6 FAULT CODE TABLE
2.4.1 ADJUSTING THE CENTRAL HEATING TEM-
PERATURES (see fig.1)
The heating selector can be adjusted between 20
°C and 80 °C.
2.5 DIGITAL DISPLAY
The digital display shows the current mode of
operation and/or status of the boiler. Should a fault
develop, the display will show a unique fault code
that can be used to help rectify the cause of the
fault.
Should a fault code be displayed, check the
fault code table to identify the cause and course
of action to take. Always wait 2-minutes before
pressing the reset button.
Code Reason Action required
10 Ignition anomaly Reset appliance, if fault continues, call engineer
11 No flame detected Wait
12 Restarts ignition Wait
13/14 Wiring fault Call engineer
20/21/22 Heat exchanger temperature too high Call engineer
23/31 Wiring fault Wait
30 Wiring fault Call engineer
32/34 Fan fault Call engineer
33/35 Fan fault Wait
40 Low water pressure Check/restore system pressure and reset
41 Low water pressure Check/restore system pressure
42 Pressure gauge fault Call engineer
50/51/52 Internal fault Reset appliance, if fault continues, call engineer
53/54/55/56 Internal fault Reset appliance, if fault continues, call engineer
60/61 Sensor fault Call engineer
62 Wiring fault Call engineer
70/72/74 Temperature anomaly Call engineer
71/73 Temperature anomaly Wait
75/76 Wiring fault Call engineer
77 Temperature anomaly Call engineer
80/90/91 Internal fault Call engineer
92 Condensate pipe blocked Call engineer
93/95 Condensate pipe blocked Wait
94 Wiring fault Call engineer