1
The
Mynute VHE
comprises a range of high-effi ciency
open-vent boilers with outputs ranging from 12 to 20kW.
These appliances – by design – incorporate premix
com-
bustion and a radial aluminium heat exchanger.
NOTE
This booklet relates specifi cally to the Mynute 15VHE only.
The
Mynute 15VHE
are produced as room sealed,
category II2H3P appliances, suitable for internal wall
mounting applications only. Each appliance is provided
with a fan powered fl ue outlet with an annular co-axial
combustion air intake that can be rotated – horizontally
– through 360 degrees for various horizontal or vertical
applications; in addition, there is also a facility to re-
confi gure the fl ue outlet from a top outlet to rear outlet.
The
Mynute VHE
can also be used with the Vokera twin
fl ue system.
These appliances are designed for use with an open-vent
system; consequently they are not intended for use on
sealed or pressurised systems. Please contact the Vokera
technical helpline for advice should you wish to use the
Mynute VHE
on a sealed/pressurised system.
Mynute VHE
boiler complies with basic requirements of the
following Directives: Gas directive 2009/142/EC; Yield directive
9
2/42/EEC;
- Electromagnetic compatibility directive 2004/108/EC;
- Low-voltage directive 2006/95/EC;
- Directive 2009/125/EC Ecodesign for energy-using ap-
pliances;
- Directive 2010/30/EU Indication by labelling of the con-
sumption of energy by energy-related products;
- Delegated Regulation (EU) No. 811/2013;
- Delegated Regulation (EU) No. 813/2013;
When the product reaches the end of its life it should
not be disposed of as solid urban waste but should be
brought to a separated waste collection facility.
This booklet is an integral part of the appliance. It is
therefore necessary to ensure that the booklet is handed
to the person responsible for the property in which the
appliance is located/installed. A replacement copy can
be obtained from Vokera customer services.
All installers are asked to follow the Benchmark Scheme
by adhering to the Code of Practise, which can be obtai-
ned from
www.centralheating.co.uk
.
INTRODUCTION
Fig. 1
G
F
R
General layout (fi g. 1)
1 Gas
valve
2 Injector
3 Fan
assembly
4 Return
sensor
5
Condensate level sensor
6
Main heat exchanger
7 Spark
Electrode
8
High limit thermostat
9 Limit
thermostat
10
Internal fl ue gas analysis test point
11
External fl ue gas analysis test point
12
Flue outlet & air intake
13 Top
AAV
14 Drain
pipe
15 Flow
sensor
16 Sensing
Electrode
17 Ignition
transformer
18 Condense
trap
19 Condensing
drain
R
Heating return connection
F
Heating fl ow connection
G Gas
connection
The Mynute VHE is approved for use with C13 & C33
type
fl
ue applications.
