background image

1

USERS INSTRUCTIONS

1.1 GAS APPLIANCES

Gas Safety (Installations and Use) Regulations (UK).

In the interests of your safety and that of others it is a legal
requirement that all gas appliances are installed and correctly
maintained by a competent person and in accordance with the
latest regulations.

1.2 ELECTRICAL SUPPLY

Please ensure that this appliance has been properly con-
nected to the electrical supply by means of a double pole
isolator or un-switched socket, and that the correct size of fuse
(3 AMP) has been fitted.

Warning: this appliance must be earthed!

1.3 GUARANTEE REGISTRATION CARD

Please take the time to fill out your guarantee registration card.
The completed warranty card should be posted within 30 days
of installation.

1.4 APPLIANCE  LOG BOOK (UK only)

A logbook section can be found at the rear of the appliance
installation booklet. This important document must be completed
during the installation/commissioning of your boiler.  All GAS
SAFE registered installers carry a GAS SAFE ID card, and have
a registration number. These details should be recorded in the
Benchmark logbook section within the installation booklet. You
can check your installers details by calling GAS SAFE direct on
08004085500. Failure to install and commission the appliance
in accordance with the manufacturers instructions may
invalidate the warranty. This does not affect your statutory
rights.

1.5 HOW DOES IT WORK?

Your Compact SE boiler supplies heated water to your radiators
and hot water to your hot water taps.
The central heating is controlled via a time clock and any
thermostats that your installer may have fitted.  The boiler will
light when it receives a request from the time clock via any
thermostat that may be installed, or whenever a hot water outlet
(tap) is opened.
Your Compact SE boiler lights electronically and does not have
a pilot light.
In the unlikely event of a fault developing with your boiler, the
supply of gas to the burner will be terminated automatically.

Dear Customer

Your Vokèra Compact SE boiler has been designed to meet and exceed the very latest standards in gas central heating
technology, and if cared for, will give years of reliable use and efficiency.
Please therefore take some time to read these instructions carefully.

Do’s and Don’t’s

-

Do

 ensure that the system pressure is periodically checked

-

Do

 ensure that the boiler should not be used by children or unassisted disabled people

-

Do

 ensure that you know how to isolate the appliance in an emergency

-

Do

 ensure that you are familiar with the appliance controls

-

Do

 ensure that your installer has completed the appliance log book section

-

Do not

 attempt to remove the appliance casing or gain internal access

-

Do not

 hang clothes etc. over the appliance

-

Do not

 forget to have the appliance serviced annually.

This booklet is an integral part of the appliance. It is therefore necessary to ensure that the booklet is handed to the person
responsible for the property in which the appliance is located/installed. A replacement copy can be obtained from Vokèra
customer services.

INTRODUCTION

1.6 DIMENSIONS

1.7 CLEARANCES REQUIRED

ABOVE

150 mm

BELOW

150 mm

LEFT SIDE

12 mm

RIGHT SIDE

12 mm

FRONT

600 mm

Compact 24 SE

HEIGHT

715 mm

WIDTH

405 mm

DEPTH

248 mm

1.8 FROST PROTECTION SYSTEM

The Compact SE is equipped with a built-in frost protection
system, this enables the boiler to over-ride the time controls –
even if switched off – and operate the burner and/or pump,
should the temperature drop below 5

0

C for the main and for the

DHW line. In particular the burner will be in ON status until the
main temperature reaches 35°C for CH appliance and 55°C for
DHW appliance.
Please note that the frost protection system is designed to
protect the appliance only, should frost protection be required
for the heating system, additional controls may be required.

NOTE

The frost protection system is reliant on the appliance having
a permanent electrical supply, and being in a non-fault
condition.

1.9 APPLIANCE STATUS INDICATORS

Your boiler is equipped with 2 status LED indicators, the Green
LED indicates that the flame is present, the Red LED indicates
the appliance has detected a fault.

1. THINGS YOU SHOULD KNOW

Содержание Compact 24 SE









































Отзывы: