Installation Instructions
22
User Manual CPM II2066en Rev. C
© BTG 2020
3.1.3.3
FCM Connections
NOTE!
Before installation, ensure that all power to the system has been turned off.
Cable connections must be made by authorized personnel.
1. Insert the signal cables through the cable glands.
2. Connect the cables to the FCM-80 as shown on the following page.
NOTE!
The connection blocks can be released from the connection module for easier
access, as shown in figure 15 below.
3. Connect the shield to the upper connection point on the shield filter module.
CAUTION!
The cable shield must always be connected to the upper connection point on
the shield filter module, and kept separated from the transmitter cable shield.
DANGER
Hazardous voltage
in the equipment
Fig 15 Releasing the
connection blocks
Содержание BTG CPM-1300
