manualshive.com logo in svg

Void Venu 10, Руководство пользователя, Страница: 61 / 64

Поделиться
Скачать
Void Venu 10 Скачать руководство пользователя страница 61

Venu Series User Guide V1.0

Page 61

12 Appendix D: architectural specifications

Venu X architectural specifications

The loudspeaker shall be a compact sub bass system consisting of two high power 12” (304.8 
mm) direct radiating reflex loaded low frequency (LF) transducers mounted in a rectangular 
enclosure.

The low frequency transducers shall be constructed on a cast aluminium frame, with a treated 
paper cone, dual 50.8 mm (2”) voice coil, wound with copper wires on a high-quality voice 
coil former for high power handling and long-term reliability.

Performance specifications for a typical production unit shall be as follows: the usable 
bandwidth shall be 34 Hz to 160 Hz (±3 dB) and have a maximum on axis SPL of 134 dB 
peak (128 dB continuous) measured at 1 m using IEC265-5 pink noise. Power handling shall 
be 1200 W AES at a rated impedance of 4 

:

 and a pressure sensitivity of 99 dB measured 

at 1W/1m. The system shall be powered by its own dedicated power amplification module 
with DSP management, with the wiring connection via a single removable, lockable wiring 
connector with four screw-down terminals (one pair for input and one pair for loop-out to 
another loudspeaker) to provide secure wiring and allow for pre-wiring of the connector 
before the installation. This connector should then screw lock to the enclosure to ensure 
secure attachment.

The enclosure shall be constructed from a 15 mm multi-laminate birch plywood, finished in a 
textured polyurethane and shall contain fixture points for a pressed weather-resistant, powder 
coated steel grille to protect the low frequency transducer. The cabinet shall have a recessed 
rear connector panel to allow placing it against the wall. External dimensions of (H) 370 mm x 
(W) 780 mm x (D) 490 mm (14.6” x 30.7” x 19.3”). Weight shall be 44.5 kg (98.1 lbs).

The loudspeaker system shall be a Void Acoustics Venu X.

Содержание Venu 10

































































Отзывы:

Нет отзывов