manualshive.com logo in svg

Void Venu 10, Руководство пользователя, Страница: 53 / 64

Поделиться
Скачать
Void Venu 10 Скачать руководство пользователя страница 53

Venu Series User Guide V1.0

Page 53

12 Appendix D: architectural specifications

Venu 6 architectural specifications

The loudspeaker shall be a passive two-way system consisting of one high power 6.5” (165 
mm), direct radiating, reflex loaded, low frequency (LF) transducer and 1” (25 mm) diameter 
composite plastic exit, high frequency (HF) compression driver mounted on a user rotatable 
elliptic horn in a trapezoidal enclosure.

The low frequency transducer shall be constructed on a cast aluminium frame, with a treated 
paper cone, 38.1 mm (1.5”) voice coil, wound with copper wires on a high quality Kapton voice 
coil former, for high power handling and long-term reliability. The high frequency transducer 
shall project it’s sound through an elliptic horn with a 150 mm (6”) baffle diameter to achieve 
pattern control and low distortion.

Performance specifications for a typical production unit shall be as follows: the usable on-axis 
bandwidth shall be 72 Hz to 22 kHz (±3 dB) and shall average 90° directivity pattern on the 
horizontal axis and 60° on the vertical one (-6 dB down from on-axis level) from 1 kHz to 12 
kHz; and a maximum SPL of 121 dB peak measured at 1 m using IEC268-5 pink noise. Power 
handling shall be 200 W AES at a rated impedance of 8 

:

. Crossover point shall be at 2.4 kHz 

using a 3rd order filter (18 dB per octave). The system shall be powered by its own dedicated 
power amplification module with DSP management. The wiring connection shall be via a single 
removable lockable wiring connector with four screw-down terminals (one pair for input and 
one pair for loop-out to another loudspeaker) to provide secure wiring and allow for pre-wiring of 
the connector before the installation. This connector should then screw lock to the enclosure to 
ensure secure attachment.

The enclosure shall be of a trapezoidal shape constructed from a 15 mm multi-laminate 
birch plywood of 15 mm construction, with a textured polyurethane finish and shall include 
integral threaded inserts for the fitment of wall and ceiling mounting hardware with external 
dimensions of (W) 372 mm x (H) 239 mm x (D) 200 mm (14.6” x 9.4” x 7.9”). Weight shall be 8.5 
kg (18.7 lbs).

The loudspeaker shall be the Void Acoustics Venu 6.

Содержание Venu 10

































































Отзывы:

Нет отзывов