Void Venu 10 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 64

Void Venu 10 Скачать руководство пользователя страница 6

Venu Series User Guide V1.0

Page 6

All Void Acoustics products are carefully manufactured and thoroughly tested before being
dispatched. Your dealer will ensure that your Void products are in pristine condition before
being forwarded to you but mistakes and accidents can happen.

Before

signing for your delivery:

• Inspect your shipment for any signs of contamination, abuse or transit damage as soon as

you receive it

• Check your Void Acoustics delivery fully against your order
• If your shipment is incomplete or any of its contents are found to be damaged; inform the

shipping company and inform your dealer.

When you are removing your Venu loudspeaker from its original packaging:

• All Venu loudspeakers come double boxed and each box is stapled shut; take care when

unboxing and removing the staples to avoid injury or damage to the loudspeaker

• If you need to place the Venu loudspeaker on a ﬂat surface ensure you use a lint free

product to protect the ﬁnish

• When you have removed the Venu loudspeaker from the packaging inspect it to ensure

there is no damage and keep all original packaging in case it needs to be returned for any
reason.

See section

2 for warranty conditions and see section 8 if your product needs servicing.

3 Unpacking and checking

«
...
4
5
6
7
8
...
»

Содержание Venu 10

































































Отзывы:

Нет отзывов