manualshive.com logo in svg

Void Venu 10, Руководство пользователя, Страница: 59 / 64

Поделиться
Скачать
Void Venu 10 Скачать руководство пользователя страница 59

Venu Series User Guide V1.0

Page 59

12 Appendix D: architectural specifications

Venu Bass architectural specifications

The loudspeaker system shall be of the active type consisting of one high power 12” (304.8 
mm) direct radiating, reflex loaded low frequency (LF) transducer in a rectangular enclosure. 
The enclosure shall be constructed from a 15 mm multi-laminate birch plywood, finished in 
textured polyurethane with the external dimensions of (H) 370 mm x (W) 490 mm x (D) 430 
mm (14.6” x 19.3” x 16.9”). The cabinet shall contain fixture points for a pressed steel powder 
coated grille to be fitted to the front to protect the LF transducer.

The low frequency transducer shall be constructed on a cast aluminium frame, with a treated 
paper cone, 101.6 mm (4”) voice coil, wound with copper wire on a high quality voice coil 
former, for high power handling and long-term reliability.

Performance specifications or a typical production unit shall be as follows: 600 W long-term 
program per voice coil using EIA RS- 426A pink noise (6 dB crest factor). Frequency response, 
40 Hz–160 Hz (-10 dB from rated sensitivity). Pressure sensitivity, 96 dB at one Watt 100 Hz–10 
kHz at one metre. Rated nominal Impedance shall be 4 

:

.The loudspeaker shall weigh 24 kg 

(52.9 lbs) in its entirety.

The wiring connection shall be via a single removable lockable wiring connector with four 
terminals (one pair for input and one pair for loop-out to another loudspeaker) with screw-
down terminals to provide secure wiring and to allow for pre-wiring of the connector before 
the installation. This connector should then screw lock to the enclosure to ensure secure 
attachment.

The loudspeaker system shall be a Void Acoustics Venu Bass.

Содержание Venu 10

































































Отзывы:

Нет отзывов