DATA FILER
10.3 PLAYING A LIST
Once the List has been created, it can be recalled from the MAIN PAGE by simply pressing
the LIST] button in the MODE section.
The first List on the active unit will be displayed on the selection field. The user can scroll
through the Lists present using the encoder or by means of the DIRECTORY function which in
this case will only display the files relating to this category (the songs are not displayed).
Once the List required has been selected, press [ENTER] to load it and then [PLAY] to perform
it.
If the active unit does not contain any Lists, the selection field will display the message
EMPTY
.
See point 5.1.1 for information about the error video pages relating to performance of the
songs contained in Lists.
10.3.1 ERROR MESSAGES – PLAY LIST
CHAIN EMPTY
NOTES
ü
The List may be selected both in the field next to the [F1] button and in the
SONGNEXT
field. In this second case the List will be played automatically at the
end of the current song.
ü
If a song is booked in the
SONGNEXT
field during performance of a List, it will be
played not at the end of the List but as soon as the current step is completed.
ü
If the List resides on a floppy disk, do not extract the disk during performance of the
List.
ü
If some steps of the List envisage songs on a floppy disk which is not inserted, the
relative steps will be skipped.
177
