voestalpine Bohler URANOS 4000-5000 GSM, Инструкция по эксплуатации

Страница: 17 / 43

49
3.7 Synergic curves screen
1 General
Allows the selection of the required welding method.
1
It allows the selection of:
Synergic welding method
Makes it possible to use a series of pre-settings
(synergic curves) available in the memory of the
system.
The changing and correction of the initial set-
tings proposed by the system is allowed.
Manual welding method
Allows the manual setting and regulation of
each individual welding parameter (MIG/
MAG).
Select however one of suggested synergies (5-6) in
order to take advantage of ignition potentiality,
closing arc features….
2/3
Lets you select:
- type of filler material
- gas type
4
Lets you select:
- wire diameter
5
- Type of filler material
- Gas type
6 Wire diameter
7 Header
(See the "Main screen" section).
NO PROGRAM
Indicates that the selected synergic program is not avail-
able or is not consistent with the other system settings.
2 Synergic curves
MIG/MAG
G3/4 Si1 CO2
G3/4 Si1 Ar 18%CO2
CrNi 19 9 Ar 2%CO2
AlMg5 Ar
AlSi5 Ar
Al99,5 Ar
CuAl8 Ar
CuSi3 Ar
Basic FCW Ar 18%CO2
Rutil FCW Ar 18%CO2
Metal FCW Ar 18%CO2
CrNi 19 9 FCW Ar 18%CO2
Ø (mm)
0,8
(S) 2
(S) 7
(S) 12
(S) 17
(S) 22
(S) 27
(S) 32
(S) 37
/
/
/
/
1.0
(S) 3
(S) 8
(S) 13
(S) 18
(S) 23
(S) 28
(S) 33
(S) 38
/
/
/
/
1.2
(S) 4
(S) 9
(S) 14
(S) 19
(S) 24
(S) 29
(S) 34
(S) 39
(S) 42
(S) 46
(S) 50
(S) 54
1.6
(S) 5
(S) 10
(S) 15
(S) 20
(S) 25
(S) 30
(S) 35
(S) 40
(S) 44
(S) 48
(S) 52
(S) 56
Pulsed MIG
G3/4 Si1 CO2
G3/4 Si1 Ar 18%CO2
CrNi 19 9 Ar 2%CO2
AlMg5 Ar
AlSi5 Ar
Al99,5 Ar
CuAl8 Ar
CuSi3 Ar
Basic FCW Ar 18%CO2
Rutil FCW Ar 18%CO2
Metal FCW Ar 18%CO2
CrNi 19 9 FCW Ar 18%CO2
Ø (mm)
0,8
-
(P) 7
(P) 12
(P) 17
(P) 22
(P) 27
(P) 32
(P) 37
/
/
/
/
1.0
-
(P) 8
(P) 13
(P) 18
(P) 23
(P) 28
(P) 33
(P) 38
/
/
/
/
1.2
-
(P) 9
(P) 14
(P) 19
(P) 24
(P) 29
(P) 34
(P) 39
(P) 42
(P) 46
(P) 50
(P) 54
1.6
-
(P) 10
(P) 15
(P) 20
(P) 25
(P) 30
(P) 35
(P) 40
(P) 44
(P) 48
(P) 52
(P) 56
3.8 Programs screen
1 General
Allows the storage and management of 64 welding pro-
grams which can be personalised by the operator.
1/2/3/4 Functions
5 Number of the selected program
6 Main parameters of the selected program
7 Description of the selected program
8 Heading
(consult the “Main screen” section).
2 Program storage
Enter the “program storage” menu by pressing button
for at least 1 second.