Vodavi Starplus DHS, Техническое руководство

Страница: 97 / 338

3-16 DHS-E Installation
†
Six conductor modular jack assemblies for all station instruments (recommended).
†
Standard punch-down terminal block(s), 66M1-50 type, as required.
†
Industry-standard, 25-pair cable(s) with a 50-pin male amphenol/AMP type
connector for connection from each equipped 3 x 8 module to the MDF.
†
AC voltage surge/spike protector.
Standard telephone hand tools and mounting hardware for the KSU, MDF backboard,
punch-down terminal block(s), modular jack assemblies for CO lines, etc.
Some additional tools suggested to have on-hand when installing the DHS-E system
include:
Verify On-Site Equipment
Once the equipment installation site is identified and a dedicated AC outlet, earth
ground, adequate lighting and ventilation are available, verify that all equipment
required is on-site and was not damaged during shipping:
†
Unpacking the KSU - The Key Service Unit is shipped in its own protective carton and
contains the following:
†
Basic KSU
†
One mounting template
†
One System Installation & Maintenance Manual
Open the carton and verify that all items are complete and undamaged. Remove all
packing material and store for future use in the event that return shipment is
required. This should be performed at the installer’s office with a 48-hour burn-in
period prior to installation.
†
1 box 4 pairCat3 orCat5 twisted pair
†
Drywall screws
†
Multi-meter (fluke)
† 25 pair Amp cables (male-female) † Electrical tape † Permanent marker (0.8 mm,
0.5 mm for certain
applications)
†
25 pair Cat3 cable
†
Extension cord (three-
prong with ground)
†
Phillips head screwdrivers:
#1 x 4
#2 x 4
#2 x 6
† 89B-Brackets † Fiber rod for fishing walls † Phone jacks
† B splice connectors or Scothlok
TM
splicing connectors
† Fish tape † Punch Down Tool (110 and
66 Block Blades)
† Bridge clips † Harmonica adapter † RJ11 plugs
† Butt set (T.S. if possible) † In-line adapter † RJ45 plugs
† Chain for fishing walls † Ladder † Standard screwdrivers:
1/8 x 4 in.
1/4 x 4 in.
3/16 x 6 in.
5/32 x 4 in.
†
Computer with RS232
†
Level
†
Static/Ground Strap
† Cordless drill † Linesmen scissors † Toner
† Diagonal wire cutters † Long nose pliers † Wand (Induction Amp)
†
Digit grabber
†
M1-66 split blocks
†
Wire spools
† Drill † Modular crimping tool
(RJ-11 and RJ-45) † Yellow 77 (lubricant for wire)