Vodavi Starplus DHS, Техническое руководство

Страница: 137 / 338

4-16 Automatic Line Selection
Automatic Line Selection
Description
This feature allows you to access a specific outside line or intercom (ICM) automatically
when you lift the handset or press [SPKR].
A line will not be accessed automatically when your telephone is receiving an incoming
call (outside or intercom) or a line is recalling at your telephone. However, you may
override this incoming call priority operation by pre-selecting an outgoing line before
lifting the handset.
Operation
Basic and Enhanced Telephones
1. Press [FEAT]
2. Dial [9] + [5]
3. Dial the following codes to select the item you want the telephone to access
automatically: [0] - intercom, [1] - any outgoing line, [2] + [x] - any specific line, where
x is that line dial [0] (0-9 for line 10, [
✳
] for line 11, [#] for line 12).
Executive Telephones
1. Press [FEAT]
2. Dial [9] + [5]. The display will show:
3. Press the [chg] button to select between ICM, OUTG LN (any outgoing line), CO LN
(for each of the equipped lines).
Canceling an Automatic Line Selection
Basic and Enhanced Telephones
1. Press [FEAT]
2. Dial [
✳
] + [9] + [5]
Executive Telephones
1. Select [empty] during Step 3 of the programming sequence.
Conditions
†
A Line Programmed for Automatic Line Selection must be programmed as available
for access in system programming.
†
When Automatic Line Selection is set to EMPTY, you will not hear a dial tone when
you lift the handset or press [SPKR]. However, you may still dial intercom numbers.
†
The selection OUTG LN (for any outgoing line) is only available when the System Type
is set for PBX in system programming. When set for OUTG LN, intercom numbers may
still be dialed while on hook.
S E LE C T : I C M
c h g