VocoPro PA-PRO 900, Руководство пользователя

Страница: 23 / 32

23
SDR-3 RECORDER (optional accessory)
Use the optional SDR-3 (if installed) to capture audio direct
to SD card. Once recorded, the audio can then be routed
to either CH 7-8 or the MAIN mix for immediate playback.
Of course, you can also remove the SD card and transfer
the MP3 fi les to your computer for further editing and
processing.
1. REC VOL CONTROL
– Use this control to set the
recording gain level. Turn clockwise to increase the gain,
turn counter-clockwise to decrease the gain level. Use the
REC LEVEL LEDs to monitor the record level as you adjust
the REC VOL CONTROL. Note that the REC VOL CONTROL
does not control the volume level when playing back from
the SD card.
2. PLAY/STOP BUTTON – This dual function is used to
initiate playback of recorded material, and to stop playback,
or a recording, in progress.
When not in record mode, press the PLAY/STOP button to
start playback. Playback will commence from the last track
recorded.
During a recording, press the PLAY/STOP button to stop
the recording and conclude the track.
3. PREV BUTTON – This button will skip back through
previously recorded tracks. When the fi rst track recorded
is reached, it will continue to skip back starting with the last
track recorded.
4. NEXT BUTTON – This button will skip forward through
previously recorded tracks. When the last track recorded
is reached, it will continue to skip forward from the fi rst
recorded track.
5. REC BUTTON
– This button is used to put the SDR-3 in
record mode, initiate recording, and pause a recording in
progress without creating a new track.
In stop mode, press the REC button once to place the SDR-
3 in record pause mode. This is the time to check the levels
of the audio to be recorded and adjust the REC VOL control
if necessary.
Press the REC button a second time to begin recording.
Pressing the REC button during a recording in progress will
pause the recording without creating a new track. This is
useful for recording several sections of a recording session
into a single cohesive track without breaking it up into
several tracks.
6. REC LED – This red LED indicates the recording status
of the SDR-3. When the SDR-3 is in record pause mode,
the REC LED will blink. When a recording is in progress, the
REC LED will be stay lit until the recording is completed, or
is set back to record pause mode.
7. PLAY LED – This orange LED will illuminate during
playback of recorded material, and during a recording in
progress.
8. POWER LED – This green LED indicates the SDR-3 is on
and drawing power from the PA-PRO 900. This LED should
illuminate and stay lit as long as the PA-PRO 900 is powered
on.
Optional Accessories
��� ���� ����� ���
��� ���
��������� ��� ���������
�����
�������������������
�����
�������������������
���� ���� ���� ���� ���
�� ��
���� �����
�
�
� � � ��
� � �
�
��