VocoPro PA-PRO 900, Руководство пользователя

Страница: 20 / 32

20
29. MONITOR GRAPHIC EQ
– This 7-band graphic EQ is
29. MONITOR GRAPHIC EQ 29. MONITOR GRAPHIC EQ
used to customize the sound of the MONITOR mix output.
This EQ section affects the signals found in the MONITOR
(1/4”) jack and the speaker-level jack (when confi gured to
MAIN L, R+MONITOR). The 7 slide controls each represent
a frequency band: 125, 250, 500, 1K, 2K, 4K, and 8K.
Each of the slide controls adjusts the audio level of its
particular frequency with up to a 12dB boost or cut. If left
in the center position, there will be no change to audio
level the frequency. It is important to remember that EQ
controls are meant to provide precise adjustments to an
audio signal, and not overly infl ate a signal resulting in an
unnatural sound. Human hearing can adapt quite quickly to
a particular sound signature, so it is best to fi nd a suitable
setting and leave it there until a change in the source audio
or environment requires a change in the EQ.
30. MONITOR LEDs – These mono LEDs display the output
level of the MONITOR mix. The LEDs are marked from
–10dB to +6dB. It is important to monitor these LEDs as
they can prevent a bloated audio signal and possible damage
to your speakers. An optimal signal will be mostly contained
to the green LEDs (up to 0dB), with occasional peaks into
the fi rst red LED (+3dB). If the mix r6dB, it is
strongly advisable to reduce the MONITOR LEVEL control.
31. MONITOR LEVEL
– This control adjusts the signal level
of the MONITOR mix to be sent to the line-level outputs,
MONITOR LEDs, and speaker-level output. This control
provides a one-touch adjustment to the MONITOR mix, when
the power amp assign is set to MAIN L,R+MONITOR output.
When the MONITOR LEDs enter the +6dB range, use this
control to make a quick adjustment.
32. DSP REV TO MONITOR – This control adjusts the
amount of DSP effects that is applied to the MONITOR mix.
This control is ideal for making quick on-the-fl y adjustments
to the DSP effects level on the MONITOR mix, which is
routed to the line-level outputs and speaker-level output.
When confi guring your DSP effects, this control is used
after the MASTER EFFECT LEVEL control in the DSP controls
panel.
Front Panel Features
�
�
�
�
�
�
� �
�
��
��
��
��
��
�� ��
��
��
��
��
��
��
��
��
��
��
��
��
��
�� ��
��
��
��
�� ��
��
��
��
�� ��
��
��
��