VocoPro CDG-7000RV, Руководство пользователя

Страница: 20 / 24

20
Descriptions and Functions
1. CD+G FUNCTION:
-
Open/Close Button -
Opens and closes the disc tray .
- Previous Button - Press to jump to the previous track .
- Next Button - Press to jump to the next track .
-
Stop Button -
Stops the disc .
- Play Button - Plays a disc .
- Pause Button - Pause the disc .
2. SOURCE -
This button allows you to select between M1, CD+G, DVD,
M2 and AUX player source to the CDG-7000RV . This allows the CDG-
7000RV to differentiate between all the related sources and AUDIO
INPUT options available on the back panel .
3. VOCAL CANCEL/VOCAL PARTNER:
VOC/C: Vocal Cancel key . This feature is designed to work only with “multiplex”
karaoke discs . By pressing this key the “guide” or “lead” vocal on the multiplex
disc will be removed throughout the entire song . To hear the guide/lead vocal
press the key again .
VOC/P: This feature is designed to work only with “multiplex” karaoke discs .
By pressing this key the “guide” or “lead” vocal on the multiplex disc will be
removed when you are singing . When you stop singing the “guide/lead” vocal
will again become audible, so it’s like having a “vocal partner” . For example, if
you want to sing every other verse in a song you may do so when using this
feature . The “guide/lead” vocal will automatically begin a second after you stop
singing and become inaudible when you resume singing until the VOC/P key is
pressed again .
4. DIGITAL KEY CONTROL -
You can adjust the key of your source music in half-step increments to match the
natural range of your voice using the KEY CONTROL buttons on the remote control . Press any of the four flat
(b) buttons on the left side of the KEY CONTROL controls to select a flat (b) or (lower) key . Press any of the four
sharp (#) buttons on the right side of the KEY CONTROL controls to select a sharp (#) or (higher) key . To return
to the original key of the music input source, press the center natural ( ) button . You will see the KEY CONTROL
DISPLAY reflect the KEY CONTROL step you have selected . The increase in numbers for both flat (b) and sharp
(#) represent an increase in amount of key change, 1 being the least amount, 6 being the most (the numbers will
appear as negatives to measure flat) .
5. STANDBY - Puts the CDG-7000RV in standby mode .
6. MUSIC VOLUME - Use the to raise the MUSIC VOLUME and the to lower the MUSIC VOLUME .
7. MIC VOLUME -
Use the to raise the MIC MASTER VOLUME and the to lower this mixed MIC MASTER
VOLUME .
The maximum operating distance between the Remote Control and the REMOTE SENSOR is approximately 23 feet . If
the effective distance of the Remote decreases, replace the batteries . To install new batteries, remove the battery
compartment lid on the back of the Remote and insert two AA batteries with polarities aligned .