VocoPro CDG-7000RV, Руководство пользователя

Страница: 13 / 24

13
Getting Connected
Connecting an External Effects or EQ Device to the CDG-7000RV
The CDG-7000RV has EFFECT LOOP INPUT and OUTPUT jacks that can be used to add additional effects to
the audio signal which is sent to the speakers .
1 . Remove the EFFECT LOOP BARS and store them in a safe place .
2 . Connect an L/R RCA cable from the EFFECT LOOP OUTPUT on the CDG-7000RV rear panel to the
INPUT jack on the External Effects or EQ device .
3 . Connect an L/R RCA cable from the OUTPUT of the EXTERNAL EFFECTS or EQ DEVICE to the EFFECT
LOOP INPUT on the CDG-7000RV rear panel .
WARNING: If effects loops jacks are empty, there will be no audio output.
EXTERNAL EFFECTS OR EQ DEVICE
IN OUT