G406L User Guide Document: G406L-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
6
System Setup Procedures
1. System structure
➢
Processor-1 controls CH-1 / CH-2) and Processor-2 controls CH-3 / CH-4).
➢
The settings for system control are done by Processor-1 (CH-1/CH-2).
➢
Each processor has independent System Reset and Save.
➢
Each processor shares the same OSD menu. User can switch among two output channels in each
Processor by [CH A/B] hotkey in remote controller.
➢
HDMI input port will share the input signal for Processor-1 & Processor-2 and Loop out port.
➢
Each output has independent image rotation/flip, scaling, cropping and color adjustment.
2. Connecting the inputs
Please apply signal source to HDMI input port before video wall settings. Otherwise, the settings will
assume the input resolution is the same as output resolution. It may affect Video wall Overlap setting
result. User can also apply DVI-D signal through DVI to HDMI adapter.
HDMI Input source
connector (Max. 8k/1k)
Raw signal Loop out for
daisy chain connection
OUTPUT
INPUT
RS-232
