G406L User Guide Document: G406L-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
30
HDMI digital signal is compatible with DVI signal. Most of display devices can support both digital
signals. Some old equipment may have less flexibility in digital signal compatibility. In this case, user
may need to select DVI output format for normal display. Each Processor shall be set separately.
17.3. System Standby and Automatically Turn Off Output Signal
➢
[Options]
→
[Accessibility]
→
[Standby Time]
➢
If set [Standby Time] at 60, the system will get into Standby Mode after 60 seconds when no input
signal is detected. The output signals from G406L will also be terminated at the same time. If G406L
detects input signal again (hot plug 5V signal), it will automatically turn on the system again.
➢
If the monitor can automatically turn off/on by detecting input signal, user can control signal source
to execute entire system on/off control.
17.4. Change Background Color
When no signal input, the system will show blue color background with [Power Saving Mode] message
on the screen. User can change background color to black from the OSD menu as below.
17.5. Change OSD Menu display time
User can set [Options]
→
[Accessibility]
→
[Menu time out]
→
[0] to display OSD menu all the time. Each
Processor shall be set separately.
17.6. Change Splash screen logo display time
User can set [Options]
→
[Accessibility]
→
[Logo time out]
→
[0] to eliminate splash screen Logo. Each
