VMIC VMICPCI-7755, Руководство по эксплуатации продукта

Страница: 76 / 126

76
A
VMICPCI-7755 Product Manual
J5 Connector Pinout
The VMICPCI-7755 J5 connector is a 2mm “Hard Metric” CompactPCI connector,
with 5 rows of 22 pins each. An additional external metal shield is also used, labeled
row F. This connector is used to route the I/O signals of PMC Site #1, and the IDE,
serial and USB signals to the backplane I/O. This connector’s controlled impedance
minimizes unwanted signal reflections. Figure A-5 illustrates the J5 connector and the
connector pinout.
Figure A-5 J5 Connector and Pinout
Pin No. Row A Row B Row C Row D Row E Row F
22 J8_5 J8_4 J8_3 J8_2 J8_1 GND
21 J8_10 J8_9 J8_8 J8_7 J8_6 GND
20 J8_15 J8_14 J8_13 J8_12 J8_11 GND
19 J8_20 J8_19 J8_18 J8_17 J8_16 GND
18 J8_25 J8_24 J8_23 J8_22 J8_21 GND
17 J8_30 J8_29 J8_28 J8_27 J8_26 GND
16 J8_35 J8_34 J8_33 J8_32 J8_31 GND
15 J8_40 J8_39 J8_38 J8_37 J8_36 GND
14 J8_45 J8_44 J8_43 J8_42 J8_41 GND
13 J8_50 J8_49 J8_48 J8_47 J8_46 GND
12 J8_55 J8_54 J8_53 J8_52 J8_51 GND
11 J8_60 J8_59 J8_58 J8_57 J8_56 GND
10 VIO J8_64 J8_63 J8_62 J8_61 GND
9 DDP[0] DOP[1] DOP[2] DOP[3] DOP[4] GND
8 DDP[5] DOP[6] DOP[7 DOP[8] DOP[9] GND
7 DDP[10] DOP[11] DOP[12] DOP[13] DOP[14] GND
6 DDP[15] IDEIOR0# IDEIORDY0 IDEIOW0# IDECS01# GND
5 HD_ACTA# IDECS03#] IRQ[14] IDEDACK0# IDEDRQ0 GND
4 IDERST# DAP0 DAP1 DAP2 USBOC0#_C GND
3 CBL_DET SP0_RI SP0_TX N/C USBP0-R_C GND
2 N/C SP0_DCD# SP0_RX SP0_CTS# USBP0+R_C GND
1 VCC_M12.0 SP0_DTR# SP0_DSR# SP0_RTS# VCC_12.0 GND
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1