_________________________________________________________________________________________
Page 6
2.3 To change the other scale settings
a)
Press [ON/OFF] button and the scale will perform a countdown.
Once the display shows ‘------’, press the [PCS] button.
b)
The scale will enter into Zero track function setting mode and the scale display will show ‘
X.Xd ZER
’.
Press [UNIT] button to select either ‘0.0d, 1.0d, 1.5d, 2.0d or 3.0d’. Press [ZERO] button to confirm.
c)
The scale will enter into Zero setting mode and the scale display will show ‘
X.Xd RTZ
’.
Press [UNIT] button to select either ‘0.5d, 1.0d, 2.0d or 3.0d’. Press [ZERO] button to confirm.
d)
The scale will enter into Filter setting mode and the scale display will show ‘
X FIL
’.
Press [UNIT] button to select either ‘0, 1, 2, 3 or 4 FIL’.
Press [ZERO] button to confirm.
*Note: The factory setting is ‘2’.
e)
The scale will enter into Percentage of Zero Range setting mode and the scale display will show ‘
XX
PZR
’.
Press [UNIT] button to select either ‘2, 5, 10 or 20 PZR’.
Press [ZERO] button to confirm.
f)
The scale will enter into Zero Range setting mode and the scale display will show ‘
X KZR
’.
Press [UNIT] button to select either ‘5 or 10 KZR.’
Press [ZERO] button to confirm.
g)
The scale will enter into Tare Range setting mode and the scale will display ‘
XX KTR
’.
Press [UNIT] button to select either ’50 or 100 KTR’.
Press [ZERO] button to confirm.
