_________________________________________________________________________________________
Page 5
2.2 To change the Auto-off function, Backlight mode and Units display mode.
a)
Press [ON/OFF] button and the scale will perform a countdown.
Once the display shows ‘------’, press the [UNIT] button.
b)
The scale will enter into Auto-off function setting and display will show ’
XX PWR
’,
where PWR means power (Auto-off function).
Press [UNIT] button to select either ‘3,5,10 or OFF’,
where the numbers indicate the minutes before the scale perform an auto-off function and selecting
‘OFF’ shall disable the auto-off function.
Press [ZERO] button to confirm.
*Note: The factory setting is ‘10’ PWR.
c)
The scale will enter to into Backlight function and the scale display will show ‘
XXX BL
’.
Press [UNIT] button to select either ‘AUTO, OFF or ON’
where ‘AUTO’ represent that auto turn off back light ‘OFF’ represent disable the backlight function,
‘ON’ represents backlight function is always on.
Press [ZERO] button to confirm.
*Note: The factory setting is ‘AUTO’ mode.
d)
The scale will enter into Unit display mode and the scale display will show ‘
XX g
’,
where g represents gram.
Press [UNIT] button to select either ‘ON’ or ‘OFF’ function
where ‘ON’ represents selected unit will be activate, ‘OFF’ represents selected unit will be deactivate.
Press [ZERO] button to confirm.
*Note: The factory setting is ‘ON’.
e)
Exit the menu.
