_________________________________________________________________________________________
Page 2
1.0
OPERATIONAL INSTRUCTION:
1.1 To perform Weighing function
a)
Turn on the power switch located at the right side of the scale. Press the Red [ON/OFF] button and the
scale will do a countdown.
b)
Allow the scale to warm up for 1 min before placing any item for weighing.
c)
Before perform weighing, ensure the scale display ‘0’ reading. If scale display is not ‘0’, perform the
following;
ZERO weigh
Press [ZERO] button to zero scale.
*Note: The ZERO key can only zero any weight which is ±3% of the maximum capacity.
TARE weight
Press [TARE] button to tare off the item weight placed on the scale.
Once the scale display ‘0’ reading, it is ready for usage.
d)
Place any item for weighing function to perform.
e)
Once the scale display shows the stability sign , the reading shown on the display is the weight of
the item.
f)
While the item is still on the weighing pan, press [UNIT] button to select and change the weigh unit.
E.g. Units such as ‘g, ‘oz’, ‘lb’ can be selected. There are up to a selectable range of 13 weigh units,
subjected to the model of the scale. The selected unit will be shown on the right side of the display.
1.2 To perform Counting function
a)
Turn on the power switch located at the right side of the scale. Press the Red [ON/OFF] button and the
scale will do a countdown.
b)
Allow the scale to warm up for 1 min before placing any item for weighing.
c)
Ensure the weigh display zero value.
d)
Perform a manual count on the number of samples and place the samples on the weighing pan.
e)
Press [PCS] button, scale display shows P= 10, where P stands for ‘Pieces’ (Number of samples).
f)
Press [Unit] button to change the P value, where P can be 10, 20, 50 or 100.
g)
Press [PCS] again to confirm the number of samples on the weighing pan.
h)
The scale is now ready to perform counting function.
