Vmac VR70, Руководство по установке

Страница: 69 / 80

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
67
□
Check the display box to see if it has initiated a system check. If
there is no display, there is no power to the control box. The
display box should display SYSTEM CHECK then SYSTEM
READY.
□
Start the engine and allow it to reach operating temperature
□
Press ON/ENTER on the display box. The display box should
show SYSTEM RUNNING and start the compressor system.
Engine RPM will increase for a few moments while the
compressor system comes up to pressure, then RPM will
settle to the VR Idle RPM. This is normal operation.
□
With the system running, release the Park Brake.
□
The system should shut down and the display box show,
ERRORS DETECTED.
□
Press ON/ENTER and the display box should show, PARK
BRAKE NOT ENABLED.
□
Re-engage the park brake.
□
Press ON/ENTER and follow on-screen directions to restart the
compressor system.
□
While the system is running, pull the truck’s hood release lever.
□
The system should shut down and show, ERRORS DETECTED.
□
Press ON/ENTER and the display box should show, CLOSE
HOOD TO START.
□
Close the truck’s hood.
□
Press ON/ENTER and follow on-screen directions to restart the
compressor system.
□
Check that the LED Beacon module is not illuminated.