Vmac RAPTAIR-G30, Руководство по обслуживанию

Страница: 54 / 96

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
52
6) Remove the filler cap by turning it counter-clockwise to remove it
from the fill fitting and pour VMAC compressor oil into the oil fill
fitting on the tank. The air compressor system holds approximately 3
liters of oil (including enough to fill the oil filter). The filter holds 0.3
liters of oil. The compressor holds about 0.5 liters of oil.
Figure 39 - Compressor oil fill
Do not overfill the system. Overfilling the system with oil
can flood the sight glass window and make the system
appear empty and may cause oil to come out of the blow-
down muffler or oil to carry-over.
7) Check the level at the sight glass at the filter end of the tank.
Continue adding oil until the level is correct.
8) Reinstall the fill cap.
9) Start the engine, allow the system to build to pressure (factory
setting 150 psi) and go to low idle speed.
10) Turn off the engine.
11) Allow the system to settle for 5 minutes and then check the oil level
through the sight glass. The level must be between the minimum
and maximum level indicators. Check for oil leaks.