-
The icon of the Lower limit of the Temperature alarm s
tarts to flash. Use the “
▲
”
and
“
▼
”
buttons to set
the required minimum temperature. Press “ ” button to confirm your
setting and to end the setting
procedure
F.Y.I.:
-
Before entering the setup, you must select the remote channel, different channels can set different
temperature alarm range
Temperature and frost alert:
-
P
ress “ ” button to activate or deactivate the
remote temperature alert, When the remote temperature
alarm is activated, the temperature alarm icon is displayed in the remote sensor bar.
-
When the remote channel temperature value exceeds the set temperature range, will activate the alarm,
the weather station will every minute continuous alarm 5 times, at the same time, temperature alarm in
alarm icon "
" flashes, If the alarm activates the temperature that is currently displayed on the channel,
its temperature value and alarm upper limit icon
“
"or lower limit icon"
" also flashes.
-
When the temperature of REMOTE SENSOR is
–
1
°C
to + 3
°C or +30°F
to + 3
7°F
, the frost alarm will be
activated, symbol " " flashing.
F.Y.I.:
-
When the temperature is higher than the upper limit of the alarm temperature setting, the activation of the
upper limit alarm, symbol "
" flashing.
-
When the temperature is lower than the lower limit of the alarm temperature, the lower limit alarm is
activated, and the symbol "
" flashes.
Low battery:
-
If the battery symbol “
” appears th
e batteries in the remote sensor should be replaced as soon as
possible.
The weather forecast:
-
The weather station calculates a weather forecast for about the next 12 hours based on the barometric
pressure trend. Of course this forecast can
‘t compare t
o that of professional weather services supported by
satellites and high performance computers, but merely provides an approximate indication of current
developments. Please take the weather forecast from your local weather forecasting service into account as
well as the forecast from your weather station. If there are discrepancies between the information from
your device and from the local weather forecasting service, please take the advice of the latter as
authoritative.
-
Press and hold the
“ ”
button for 2 seconds to enter the air pressure unit and weather settings, the
pressure units will be flashing display, Use the “
▲
”
and
“
▼
”
button to set the pressure unit to display in the
"hPa/mb" or "inHg".
-
Press the
“ ”
key to confirm the settings and switch to the weather, the weather graphics will be flashing
display, Use the “
▲
”
and
“
▼
”
button to set the current weather conditions, so that the weather forecast is
more accurate.
-
The weather station displays the following weather symbols:
sunny
slightly
cloudy
cloudy
rainy
Heavy rainy
Snowy
-
The weather station can display the barometric pressure trend.
-
You may see the following displays:
The barometric pressure will rise.
The barometric pressure will remain constant.
The barometric pressure will fall.
