Initial operation:
-
Open Weather Station battery compartment cover
-
Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]
-
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will
hear a beep tone, and detect indoor temperature & humidity.
-
The Weather Station will now start to make a connection to the Remote remote sensor. This operation
takes about 3 minutes and is displayed by a flashing reception RF antenna symbol i
n the “
REMOTE SENSOR
”
display area on the receiver.
-
This now, replace Wireless Remote Sensor battery compartment cover ,Open Weather Station battery
compartment cover ,Ins
ert 2 x AA batteries observing polarity [ “+” and “–“ marks]
-
After receiver has created a connection to the remote sensor, it will then be enters the Radio control time
receive mode.
Reception of the Radio signal:
-
The clock automatically starts the
DCF
signal search after 7 minutes of any restart or changing of new fresh
batteries. The radio mast icon starts to flash.
-
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure with the
DCF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio
mast icon disappears from the display), the system will automatically attempt another synchronization at
the next full one hour. This procedure is repeated automatically up to total 5 times.
-
To start manual
DCF
signal reception, press and hold down the “
▲
”
button for two seconds. If no signals
received within 7 minutes, then the
DCF
signal search stops (the radio mast icon disappears) and start again
at the next full one hour.
-
During RC reception
，
to stop searching radio signal, press the “
▲
”
button once.
F.Y.I.:
-
A flashing radio mast icon indicates that the
DCF
signal reception has started
-
A continuously displayed radio mast icon indicates that the
DCF
signal was received successfully
-
We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or
computer monitors
-
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
-
During the RC receive mode, only the "
▲
" button function, other button operation have no function, If you
want to carry out other functions of operation, please press "
▲
" button to exit the RC receiving mode.
Manual time setting:
-
Press once “ ”
button, can switch the display calendar or second
-
Press and hold down the “ ” button for 2 seconds, the
12/24 hour mode display starts to flash. Now use
“
▲
”
and
“
▼
”
buttons to set the correct 12/24 hour mode.
-
Pres
s “ ” to confirm your setting, the Time zones start to flash, Now use “
▲
”
and
“
▼
”
buttons set a
correct time zone (-12 to +12).
-
Press “ ” to confi
rm your
setting, the Hour display starts to flash. Now use “
▲
”
and
“
▼
”
buttons to set
the correct hour.
-
Pr
ess “ ” to confirm your setting, the Minute displays starts to flash. Now use “
▲
”
and
“
▼
”
buttons to set
the correct minute.
-
Press “ ” button
to confi
rm your setting, the Month and Date icon display starts to flash. Now use “
▲
”
and
“
▼
”
buttons to set the date display on Month/Date or Date/Month.
-
Press “ ” button to confirm your setti
ng, the Year display 2015
starts to flash. Now use “
▲
”
and
“
▼
”
buttons to set the correct year.
-
Press “ ” button to confirm your setting, the Month display starts to flash. Now use “
▲
”
and
“
▼
”
buttons
to set the correct month.
-
Press “ ” button
to confi
rm your setting, the Date display starts to flash. Now use “
▲
”
and
“
▼
”
buttons to
set the correct date.
-
Press “ ” button
to confirm your setting, the language selection for the Weekday displays starts to flash.
Now use “
▲
”
and
“
▼
”
buttons to select a language.
