°C/°F temperature display
:
-
The tempe
rature is displayed either in °C/°F. Briefly pressing the “
▲
” button allows you to
switch between
the individual modes.
Comfort display:
-
Indoor comfort level is calculated according to the indoor temperature and humidity, a total of 5 levels.
Comfortable
too cold or too hot
Displaying temperature/humidity/ barometric pressure and temperature/humidity trend:
-
The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend
(indoors) are shown in the LCD display.
-
After successfully connecting with the remote sensor, the weather station can display the remote
temperature/humidity and the temperature/humidity trend (remote)
-
You may see the following displays:
o
The temperature/humidity is rising.
o
The temperature/humidity is remaining constant.
o
The temperature/humidity is falling.
Remote sensor transmission:
-
When the Weather Station successfully receives signals from the wireless sensor, the temperature and
humidity of the
"REMOTE SENSOR"
are displayed on the
"REMOTE SENSOR"
column of the weather station.
-
The weather station can connect up to 3 channel wireless sensor registration, the use of multiple wireless
sensor, the wireless sensor channel cannot choose the same channel at the same time (a total of 1, 2, 3
channel can choose,)
-
Press the
“
▼
”
key can switch the display of different channels of remote temperature and humidity, when
displaying the symbol "
", will display the channel every 5 seconds automatically switch a channel
-
If the weather station failed to receive transmission from remote sensor (“
- -
”
display on the LCD), press and
hold
“
▼
”
button for 3 seconds to receive transmission manually. the remote temperature will show an
animation of the RF antenna symbol
，
the Base Station will re receive the wireless signal of the remote
sensor.
F.Y.I.:
-
when the wireless sensor set up different channels, the
weather
station "REMOTE SENSOR" also want to
switch to the same channel.
When there is no wireless sensor signal transmission on the channel, "--" will be
displayed in the channel of the
weather station
-
When the wireless remote sensor has no channel selection function, the sensor defaults to channel 1.
Maximum/Minimum Temperature/Relative Humidity:
-
To toggle indoor/ remote maximum, minimum temperature and humidity data,
press the “
MEM
” button
:
o
Once to show the maximum temperature and humidity values.
o
Twice to show the minimum temperature and humidity values.
o
Three times to return to the current temperature and humidity levels.
-
To reset the maximum and minimum temperature and humidity, press and hold down
the “
MEM
” button
about 2 seconds. This will reset all minimum and maximum data recorded to the current displayed values.
F.Y.I.:
-
If the temperature reading is below
ranges
, the
LL.L
will be displayed. If the temperature reading is above
ranges
, the
HH.H
will be displayed.
Remote Temperature alert setting:
-
Press and hold down the “ ” button for 2 seconds until the icon for the Temperature Alert” starts to flash
-
The icon of Upper limit of the Temperature alarm starts to flash.
Use the “
▲
”
and
“
▼
”
buttons to set the
required maximum temperature. Press “ ” t
o confirm your setting.