5
VKB Gunfighter Mk.II Quick
Guide - HARDWARE
Accessing the Gunfighter gimbal (e.g., to replace cams or change springs):
1. Disconnect the grip.
2. Unscrew the 5 screws on the dust cover ring.
3. Remove the ring and rubber dust cover.
4. If needed, unscrew the 4 screws on the base plate and remove the base plate.
5. Gently pull to disconnect the 4-pin connector from the base PCB.
6. Unscrew the
outer 4
screws*
on the top plate.
7. Pull the gimbal from the base.
8. When done, assemble in reverse order.
* The inner 4 screws hold the gimbal and are fixed in place with Loctite and are
not
meant to be removed by the
user!
Stripping these screws is not covered under VKB’s manufacturers warranty (excessive force)!
