FUNCTIONAL CHECK AND OPERATION ORDER
Note.
Special notes on operation with BKM-440
main
extra
main
intercom priority
extra
main monitor’s
extra
extra
main
When a call is made from the doorstation, the monitor rings. Image from the doorstation camera appears on the screen.
Pick up the handset and check duplex intercom. During intercom, press
to view image from the extra camera (see Fig. 4,
5, 6), if needed. Press
again to switch back to the image from the doorstation camera.
To release the door lock, press
and hold until the beep. The door is unlocked now. After you release the
button,
intercom is still available. Hang up the handset. The screen shuts off, the monitor goes to the Stand-By mode.
You can unlock the door without picking up the handset. When called, just press and hold
until the beep. The
door is unlocked now . After you release
, the monitor goes to the Stand-By mode.
To activate the individual / storey doorstation (i.e. start intercom and video monitoring on your initiative, see Fig. 5), pick
up the handset. Image appears on the screen, intercom is available. You can press
to view image from the extra
camera, if needed. Press
again to switch back to the image from the doorstation camera.
At pressing the door bell button, the monitor rings, image from the extra camera appears on the screen (see Fig. 4, 5).
To engage the sleep mode, press
and hold until the Power LED turns off.
The monitor can be connected to the BKM-440 either as the
(see Fig. 6) or the
monitor (see Fig. 7). The
monitor has an
over any
device, i.e. when you pick up the
handset, the
monitor (or extra apartment handset) is disengaged. The
monitor cannot activate the individual / storey
doorstation.
To view the door zone in front of main entrance doorstation (see Fig. 6), press
on the
monitor, or pick up its
handset. To switch to viewing the door zone in front of individual / storey doorstation, press
again. To start intercom
with the individual / storey doorstation, pick up the handset.
Ambient temperature range
+
to +
Relative humidity of air
up to
at +
5°C
40°C
93%
25°C
SPECIFICATIONS
3.5” (89mm)
Ohm
V p-p
VDC
W
14
mm
0.6 kg
OPERATING CONDITIONS
Screen
Colour system
Video IN
impedance
voltage
Operating voltage
Power consumption
max.
Dimensions (W)x(H)x(D)
x
x
Weight
TFT LCD
PAL
470
1…1.8
15…27
3
0
183
48
:
-
-
