The monitor terminals and their destination are given below
See Fig. 4 - 7 for the
of the monitor and other doorphone units.
Acceptable cross-sections of wires to connect the monitor to the power supply unit, doorstation / control unit (Fig. 4 - 5)
are given in the doorstation / control unit operating instructions.
Acceptable cross-sections of wires to connect the monitor to the commutator BKM-440 (Fig. 6 - 7) are given in the
commutator BKM-440 operating instruction.
If the monitor operates together with the commutator BKM-440, a door bell button connection is not available
:
.
examples of wiring diagrams
Note.
Terminal
LN +
LN -
GND
VI1
+E
DATA
DATA exchange between monitor and commutator BKM-440
Supply voltage for monitor
VIDEO IN from doorstation built-in camera
Ground
Intercom line between monitor and commutator /doorstation
Destination
Ec1
Ec2
GND
VI2
VIDEO IN from
camera
extra
Ground
Supply voltage for
camera
extra
Supply voltage for doorstation built-in camera
Figure
Monitor
with
doorstation and extra camera
4 -
VIZIT-M440C
multi-apartment
To next commutators
To other apartments
82-Ohm resistor should be
connected between the VO
and VG terminals of the last
commutator in the circuit
- 440
MONITOR
VIZIT M
C
Extra Camera
12 V
max
, 0.3 А
To doorstation / control unit
Door bell
button
Note.
Door bell button can be installed near your apartment door, and
connected to the GND and DATA terminals of the monitor
Commutator
BK-4MV
or BK-4V
(
)
VO
Ec
GND
LN-
GND
LN+
VI1
+E
DATA
Ec1
Ec2
GND
VI2
VO
VG
VG
-18
+18
V1
FA
LN
VG
V2
FB
LN
VG
V3
FC
LN
VG
V4
FD
LN
VG
GND
LINE
SEL
Ek
VI
18В, 0.5А
Power Supply SA03010029
GND
+E
DC IN
EXAMPLES OF WIRING DIAGRAMS
